Guide
Van stock control: how to manage stock on vans and trucks
Keep a short list for each van, give every part a Min and a Refill-to, count on one fixed day, and top up only what fell below Min. It works the same for a truck, with a spreadsheet or an app.
The system in seven steps
-
Keep a separate count for each van
Treat every van, truck and stockroom as its own location. One total for the business can’t tell you which van is short.
-
List what the van really uses
Start from your last month of jobs and receipts, or from a stock list for your trade. Remove what you never fit. A list you trust beats a long one.
-
Set a Min for each part
Min is what you use between restocks, plus one job’s worth. If the count falls below it, the part goes on the restock list.
-
Set a Refill-to
Refill-to is the amount you fill back up to. Keep it to what fits on the shelf without crowding it.
-
Pick one restock day
One fixed day stops small top-ups through the week. Friday afternoon or Monday morning both work. Choose one and keep it.
-
Count what’s left
Walk the van with the list. Only write down what is there, and don’t guess. A printed count sheet is enough to start.
-
Top up below Min, leave the rest
For each part below Min, add Refill-to minus the count. Check the stockroom and other vans before you buy more.
A worked example
One van, restocked weekly. Min is one week’s use plus one job’s worth. These figures are an example, so use your own.
| Part | Used a week | Min | Refill to | On the van | Add |
|---|---|---|---|---|---|
| 1/2" copper elbow | 8 | 10 | 20 | 7 | 13 |
| PTFE tape | 3 | 4 | 8 | 2 | 6 |
| Flexible connector | 1 | 2 | 3 | 0 | 3 |
| 3/4" ball valve | 2 | 3 | 5 | 4 | 0 |
The ball valve has 4 on the van, which isn’t below its Min of 3, so it waits for next week. That’s the point of a Min: you stop topping up parts that are fine.
Restock from the stockroom first
Vans only stay full if the stockroom does, so give it a Min and a Refill-to as well. Its Min should cover what all your vans use between deliveries, plus a little for the job nobody planned.
Say three vans each use 8 elbows a week and your supplier delivers weekly. That’s 24 a week, so a Min of 30 and a Refill-to of 50 is a fair place to start.
- Take what the van needs from the stockroom.
- Move spares from another van if one has more than it needs.
- Buy only what’s still short.
If a van needs 13 elbows and the stockroom has 9, move the 9 and buy 4. Record it as a move, not as use, so the van count goes up and the stockroom count comes down.
The weekly routine for a small team
-
On every job
The tech records what they used before leaving the site, while it’s still easy to remember.
-
The day before restock
Each driver counts their own van. They know the shelves, and it takes minutes once the list is short.
-
Restock day
One person works down the list, moves parts from the stockroom and orders what’s short.
-
Once a month
Count the stockroom, then change any Min that keeps running out or never gets touched.
Find out where missing parts went
Your count day can also show what went unrecorded. Take what the van started the week with, add anything it received, subtract what was recorded as used, and compare that with the count.
| Part | Started | Used | Should be | Count | Gap |
|---|---|---|---|---|---|
| 1/2" copper elbow | 20 | 8 | 12 | 7 | 5 |
| PTFE tape | 8 | 3 | 5 | 2 | 3 |
| Flexible connector | 3 | 3 | 0 | 0 | 0 |
| 3/4" ball valve | 5 | 1 | 4 | 4 | 0 |
A gap doesn’t mean theft. Check last week’s jobs for parts nobody recorded, and ask whether anything moved to another van. If the same part on the same van keeps coming up short, that’s when to look closer.
Free van stock sheet
One Excel file with both tables from this guide. Copy the first tab for each van, type in your counts, and it works out what to add and what’s missing.
FAQ
Common van stock questions
How much stock should a van carry?
Enough to finish a normal week of jobs without a trip to the supplier. Min covers that, and shelf space sets Refill-to. Parts you fit less than once a month usually belong in the stockroom.
How often should we restock vans?
Weekly suits most small service teams, and it’s the easiest rhythm to keep. If you restock less often, raise Min so it covers the longer gap.
How do we set Min with no usage history?
Start with an estimate from a stock list, then adjust. If a part keeps running out, raise its Min. If it never gets below Min for weeks, lower it or take it off the van.
Should every van carry the same stock?
Start from one shared list, then let each van differ. A van that does mostly boiler work won’t need the same parts as one doing bathrooms, so set Min and Refill-to per van.
How do we get techs to record what they use?
Keep it to one quick action at the van. A fixed count day also catches what was missed, so the list stays useful even when someone forgets.
Does this work for truck stock management?
Yes. It’s the same system for a van, a service truck or a trailer. Only the stock list changes with your trade.
When does a spreadsheet stop working?
A spreadsheet works well for one van and one person. It gets harder when several people change counts through the day and nobody can tell which copy is right. That’s usually the time to look at a van stock app.
Can Jobber or Housecall Pro track van stock?
Not as counts. Both keep a price book and what each job used, but not what is left on each van. See what Jobber and Housecall Pro do with parts.
Let the restock list build itself.
In Stoccr each van has its own Min and Refill-to. Your team records what they use, and Restock shows what each van needs.